1. Home
  2. Chemical Anchors
  3. Injection System Multifix USF

Injection System Multifix USF

Specification

  • Application range

    • Designed for medium-duty applications in concrete and masonry, including facades, awnings, storage racks, railings, sanitary equipment, pipe supports and cable management systems
    • Suitable for post-installed rebar applications in renovationextension and retrofit projects

    Application range
    Substrates:

    • Cracked and non-cracked concrete
    • Masonry

    Fastening elements:

    • Threaded rods (galvanized and stainless steel)
    • Post-Installed rebars
    • Internal threaded anchor rods
  • Properties

    • High-performance styrene-free vinylester resin
    • For medium-duty applications
    • Seismic action and fire exposure assessment
    • Can be used in wet concrete and water-filled drill holes
    • The cartridge can be used again until the end of its shelf life by replacing the static mixer or by closing it again with the original cap
    • 50 years working life assessmentFire exposure assessment
    • Overhead installation
    • Water-filled drill holes
    • ETA-Approval: ETA-16/0107, ETA-16/0089, ETA-22/0704
  • Notice

    Please observe the corresponding approvals during planning and processing.
    The storage temperature must not permanently exceed 25 °C! Please store upright!

Included in delivery

1 mortar cartridge USF 280 ml incl. 2 mixing nozzles
1 mortar cartridge USF 420 ml incl. 1 mixing nozzle

Orderidentifier Article Number Content ml Composite mortar Unit
Multifix USF 280 ml 9571000280 280.0 Vinylester, styrene free 1

Specifications

Content
280.0
Composite mortar
Vinylester, styrene free
Orderidentifier
Multifix USF 280 ml
Unit
1

Multifix Calculator

Calculate the mortar cartridges required for your project with this calculation tool. It will help you to reduce waste and make your installation more cost-effective.

  • Select thread diameter from the list on the far left.
  • Select the number of holes to fill by entering them in the text box above the illustration or alternatively use the plus and minus buttons.
  • Select the drilling depth using the plus and minus buttons in the illustration.
  • Done! The number of mortar cartridges required is now displayed.

Calculator